Screw-in Studs - Icemasters

SNOWMOBILE STUDS - header

ICEMASTERS – SCREW-IN STUDS FOR SNOWMOBILES

SNOWMOBILERS: With our Icemaster Screw-In Track Studs you can get lateral traction, acceleration and braking for your sled without drilling your track. The large 70 degree carbide tips really dig in. Icemasters are easy to install – they screw into the top of the lug and they require no drilling and they don’t require tunnel protectors  Installation takes less than 1 hour and requires only a 5/16 socket and cordless drill. We recommend our installation tool – SR-31.

With today’s high profile tracks, push-thru studs have to be longer and heavier which increases their cost, weight and rotating mass. The increased weight also increases the stress on the track.  Because they’re so long, push-thru’s flex more.  Icemasters are mounted on the top, in the thick part of the lugs and are rigid. This provides better bite and more positive traction control. 

HILLCLIMBERS – add these to your deep-lug paddle tracks for extra traction on those icy spots. You’ll love the extra bite you get. Beat everyone to the top.

NOTE!!  DO NOT install Icemasters in any lug or part of the lug less than ½” thick.

Self-tapping threads need no drilling and won’t pull out

  • Sharp 70 degree carbide tip for positive traction control
  • Solid carbide head for long wear
  • Icemasters will last several seasons
  • Plated finish to prevent rusting

AVAILABLE IN 3 LENGTHS: 

                RTS-2 – for lugs less than 1”

                RTS-3 – for lugs 1” to 1 ¼”

                RTS-4 – for lugs over 1 ¼”

PRICES:  same for all 3 lengths

QUANTITY

PRICE

100 pieces

$160.00

250 pieces

$345.00

500 pieces

$660.00

1,000 pieces

$1,195.00

Installation Tool (SR-31)

$7.95/each

 

Dealer Inquires Welcome

Call 585-678-9106 | E-mail: ins2@frontier.com